r| @@ @@l @a@
| @Number of spindle | @6 spindles | |
| @Lower spindle speed | @500 ` 2,000 ...@variable speed | |
| @Upper spindle oscillating frequency | @50 ` 200@per minutes variable speed | |
| @Upper spindle oscillating stroke | @0 ` 90 o | |
| @Distance between spindles | @250 o | |
| @Timer | @multi timer@2pcs. | |
| @Moter@ | @200V@@750v@@4o@@3Ø@@2pcs. | |
| @200V@@200v@@Geared@@2pcs. | ||
| @Coolant pump | @200u@@180v@@2o@@3Ø@@1pc. | |
| @Abrasive liquid tank | @Ø310o@@H@240o@@1pc. | |
| @Dimensions@ | @W@1,800o@@D@850o@@H@1,250o | |
| @Weight@ | @430kg | |
@@work of lens diameter between 20 and 100 mm and dish diameter up to 120 mm by
@@piece.
2)@Functions (Lower spindle speed, upper spindle oscillating frequency, work
@@pressure, polishing time and starting button) are controlled by each 3
@@spindles.
3)@Upper spindle is moved following the locus of approximate ellipse with
@@warrantable mechanism and tommy-bar can be directed to sphrical center
@@on concave or convex surface.
4)@Work pressure is controlled by air. Polishing time is set by timer. The
@@work is easy to load and unload as works are pressurized by pushing start
@@button and released by finishing cycle automatically.
5)@Upper spindle is lifted by snap-switch for changing lens dish and cleaning
@@work tank.
6)@Coolant tank is made of stanless steel and coolant pump is applied rust proof
@@and seal treament with blades for agitating .@Unifomity abrasive liquid can
@@be fed with preventing abrasive precipitation.
